These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples

Cyro Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vial can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

Cyro vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190oC. These sterilized tubes are provided with white, prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonalgrooves in the base give a non-twisting feature to these vials when placed in a cryo rack.
Capacity 1.0 ml, 1.8ml, 4.5ml.

Adding to the existing range of Cyro Vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.
dai-10 mm. x h-250 mm.

These Crystal Model Sets contain different coloured jacks(Red, Black & White) & connectors(long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built-in spaces to hold vials up to 2ml capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.
Type:
81 Places for 1 ml. or 1.8ml. Cryo Vials
100 Places for 1 ml. or 1.8ml. Cryo Vials

Plain Dessicators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.
Daimeter 150mm,200mm, 250mm

Polylab Dessicators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing.
The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring.
The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing.
Daimeter 150mm,200mm, 250mm

Dessicators plates – one side glazed with holes ; size 95mm to 290mm available.

Blown in Low Density Polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly.

Porcelain, flat form, with lip, both sides glazed.

Porcelain, round form, with lip, both sides glazed.

Eye Wash Bottle is a must for every laboratory, with attached eye washing cup and delivery tube and dilter in eyecap. Capacity 500 ml.

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two trpered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point to contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved.

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths, Easy to load, these are essential in microbiology and immunology labs. The surface of the rack has raised alpha-numberic index for easy identification and has a central rod handle for convenient lifting.

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
daimeter 50mm, 62mm, 75mm, 100mm, 150mm.

Porcelain, glazed outside and without lid.
Capacity (ml) : 15, 20, 25, 30, 50, 100

Hirsch, with fixed perforated plate. Glazed
Dia in cms : 3, 5, 7.5, 10, 12.5, 15

This Ice Bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.

ELISA/ASSAY plates are made of optically clear, non-toxic Polystrene. These plates with 96U bottom or flat bottom wells bear alpha numeric index. Uniform placement of all the well facilitate use of multichannel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.
Flat Bottom Elisa Plate
U Bottom Elisa Plate
Flat Bottom Assay Plate
U Bottom Assay Plate
Flat Bottom Elisa Plate-Sterile
U Bottom Elisa Plate-Sterile
Flat Bottom Assay Plate-Sterile
U Bottom Assay Plate-Sterile

This apparatus is made of p olyethylene has three main portions. The top portions is fitted witha thistle funnel and a bulb structure through which dilute acid can be poured will reacts with a metal sulphide in the base of the Apparatus. HS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Capacity 250ml, 500ml, 1000ml.

This tray is moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware and other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.
Size: 375 x 300 x 75 mm.
450 x 350 x 75 mm.