These self priming Syphons can be sued for pouring liquids from large containers to samll ones without actually lifting them. Insert the open end of the tube in the liquird, close the stop cock and pump the bulb. As soon as the liquid enters the bulb, flow is automatically regulated. Stop pumping further. Liquids can now be dispensed by opening the stopcock. Nozzle dai 6mm.

Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.
140 x 120 x 110 mm
160 x 160 x 160 mm

This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold indentification labels. The built in seal ring would set in the tube making the combination a leakproof one.

This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.
16mm & 25mm Tubes
25mm Tubes

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

An economical substitue for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purposes. The base is in the form of a grid with square openings and has fold up sides and end bars that lock into rack tops.
13 mm x 90 Tubes
16 mm x 60 Tubes
20 mm x 40 Tubes
25 mm x 24 Tubes

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freexing temperatures.
13mm x 31 Tubes
16mm x 31 Tubes
20mm x 20 Tubes
25mm x 12 Tubes
13mm x 62 Tubes
16mm x 62 Tubes
20mm x 40 Tubes
25mm x 24 Tubes
25mm x 18 Tubes
25mm x 36 Tubes
32mm x 12 Tubes

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freexing temperatures.
13mm x 31 Tubes
16mm x 31 Tubes
20mm x 20 Tubes
25mm x 12 Tubes
25mm x 18 Tubes
32mm x 12 Tubes
25mm x 36 Tubes
13mm x 18 Tubes
15mm x 18 Tubes
18mm x 12 Tubes
13mm x 62 Tubes
16mm x 62 Tubes
20mm x 40 Tubes

These containers can be sued for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof.
Capacity 30ml, 60ml.

Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.
Size 375x350x130 mm.

Volumetric Flasks, blown in Polypropylene, are stron, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.
Capacity 25ml, 50ml, 100ml, 250ml, 500ml,1000ml.

Polylab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent and unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed whereever required.
Capacity 125ml, 250ml, 500 ml, 1000ml

These Bottles are also made of Low Density Polyethylene are are therefore translucent and unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Capacity 125ml, 250ml, 500 ml