2) ROUND SHAPE TOP STAINLESS STEEL
a)Single Plate

• 8" Dia fitted on Iron metal sheet body. Temperature range 240ºC Temperature controlled by Energy Regulator. To work on 220 Volts A.C. complete with 3 core wire and plug.

b) -do but DOUBLE HOT PLATE in one row having with individual ENERGY REGULATOR. Complete with wire and plug. TOP STAINLESS STEEL

For precise adjustment of height o f equipment above laboratory table, with screw operated scissor action mechanism, actuated by a large handwheel. The top is 15x15 cm with a threaded hole for a laboratory.

Fitted with Electric motor having maximum speed up to 4000 R.P.M approx: Fitted with chrome plated Road on a Heavy Cast Iron Base. The height and angle direction of the Stirrer can be adjusted according to the requirement. Stainless steel Stirrer Rod fitted with motor to give smooth funtion. Supplied with speed Regulator. Cap. F.h.p. motor to h.p. motor available.

Our range of laminar airflow is best suitable for related projects. It is designed to provide a work area confirming to class 100 of revised US Federal standards 209-B.We offer two models in laminar airflow. The features of model 1 are as follows:
• The bench is made of thick ply board and reinforced with teak wood where ever necessary.
• All visible surface are laminated with white decolam lamination.
• All interior surfaces are painted with air drying epoxy paint.
• The filter seat has rubber padding for a perfect rubber to rubber sealing.
• At the delivery end, the unit is provided with super air HEPA Filters, comprising of non-woven microfibre glass pleated media.
• The pleats are separated by corrugated aluminium foil separators.
• Initial pressure drop is less than 25 mm.
• WC. at rated flow D.O.P efficiency is better than 99.97% down to 0.3 microns particle size.
• The HEPA Filters are protected by a plastic grill.
• The unit is illuminated by fluorescent tube lights.
Table    Size     
21x2'x21         
31x2'x21         
41x2'x21
6'x2'x2 8'x2'x2'
Our another range of laminar airflow, i.e. model II vertical type consists of following features:
• All other feature remain the same as those for the Horizontal type expect that airflows vertically from top to bottom.
• The bench is mounted on top of a tabular frame.
• This frame also acts as a work bench with acrylic side panels.
• The back of the frame is covered with either laminated board or aluminium sheet.
Table    Size     
2' x 2' x 2'        3'x2'x2'            4'x2'x2'
6' x 2' x 2

Top and outer body stainless steel. Fitted with speed control switch. Supplied with small Teflon coated rotor. The unit is fitted with pilot lamp to work on 220 Volts A.c Capacity. 1 to 10 litres available.

Magnifier with Light, desk style, level/angle adjustable lens diameter 127mm magnification 3X, 5X, 8X, 10X, power 110V/220V/50HZ

Made of poly styrene.

Microslide Cabinet for storing 75x25mm microslides. Cabinet is made from laminated board. The drawers are serially numbered. Each drawer has index card frame and knobs. A lock is provided.

Muffle furnace, outer made of mild steel sheet. Maximum working temperature 900^o C. Temperature control by energy regulator, with indicators, pyrometer, thermocouple, thermal fuse, etc. heating elements made of kanthal wire special high temperature alloy to ensure uniform distribution of heat. To work on 220/230 volts AC. Specially designed, light weight with special fibre insulation.

The relationship between the intrinsic viscosity of a polymer solution and the relative molecular mass of the polymer allows this apparatus to be used for quantitative determination of relative molecular mass.Comprises glass U-tube with two bulbs, connected by a capillary tube approximately 120 * 1 mm length * internal diameter. Overall height 237 mm.

Multi-coloured, showing solids, liquids, gases in separate distinctive colours with symbols & names, density, atomic radii, melting points, boiling points, atomic numbers, atomic weights, electronic structure, crystal structure, valency, ionisation potential, electro-negativity etc. Information about 105 elements is given. Size 140 x 100 cm, mounted, with rollers.

Our chemistry laboratory equipment also includes PH meters. These are manufactured to be ideally used for fast and accurate pH and ORP measurement in any laboratory. It is largely used in various laboratory to measure the PH of liquids.
Technical specifications :
Resolution 0.01 pH or 1mV
Output for recorder
Automatic polarity indicator
Range

• pH mode: 0.00 to 14.00 pH
• mV Mode: 0 to ± 1999 mV

Accuracy

• pH mode ± 0.01 to ± 1 digit
• mV Mode ± 1 mV ± 1 digit

Input Impedance greater than 10² ohms
Temperature 0 to 100° C Manual
Auto (Optional) compensation
Recorder

• pH Mode 0 to ± 10 mV

LED display 3½ digit 0.5" seven segment Work at 220 V ± 10 % A.C. 50Hz Dimensions: 75x275x175 mm (HxWxD)

Under different light conditions it can measure and analyse the gas evolved by water plants. The gas is circulated into a calibrated capillary tube, it is drawn into a plastic syringe and taken for further analysis. It consists of a white plastic panel (240 x 100 mm length x height) with miniature 3 way plastic tap, 2 syringes and a calibrated capillary tube approx.1mm bore. The specimen can be connected to the open end of the tube which is bent downwards.

Made of rubber, with thick walled neck.

Pipette with rubber teat, length approx 40 mm

Made of neutral glass, bulb form, single graduation on upper stem, permanent graduation. AVAILABLE IN BOROSILICATE GLASS ALSO

A range of economic, accurate,variable volume micro-pipettes.Models 0.5 ul to 5000 ul. They are fully autoclavable to 121. Capacity ul: 0.5-2 , 1-10, 2-20, 10-100, 20-200, 200-1000, 1000-5000

Calibrated for delivery to jet. Last drop expelled by blowing, permanent amber graduation. Clour coded. AVAILABLE IN BOROSILICATE GLASS ALSO.

It is 87.5cm long collection bag made of strong bolting netting cloth suspended by muslin reinforcement and mounted on a strong wire ring dia.30cm. Three braided strong leads are attached to swivel front. Lower end of bag is provided with 5cm opening with strong cloth pocket for tying the collection vial.

Heavy duty wooden planks finished in green colour are used as pressure plates. Chrome plated brass tightening screws and fly-nuts have been provided for strong and uniform pressure. A tilting arrangement has been made so that the fly-nuts need not be removed completely to lift the upper plank for keeping and removing plants. Size 45x30cm approx.

It is of approx 45 x 28 x12cm. in size from transparent plastic material

Pocket Loupe, Pocket sized, metal frame, chrome plated,
retrievable, with elegant box

12mm 20X
21mm 10X
21mm 30X

Designed to accept observation tube upto 220 mm length. Its improved rotating half shadow system at the front ensures perfect focus and clear definition. With angular glass scale 0-360°,divided into degrees and reading upto 0.05° with micrometer. A sugar scale from 30° to 120° reads upto 0.1 sugar degree. Supplied complete with two polarimeter tubes, 100 mm and 200 mm, and dust cover

White panel 20x18cm carries along its lower edge a glass capillary tube approximately 1mm bore, calibrated 0-100xl mm. The right hand of the capillary bent downwards and the left end is bent upwords and ground to take three way glass stopcock, whose horizontal arm is connected to a 2ml glass syringe for adjustment of liquid zero. The vertical arm of the stopcock can be connected to a plant stem or porous pot through an adaptor. With syringe, porous pot 30cm each of 3mm bore and 5mm bore rubber tubing.