It can be attached to the clinostat. It has provision for 15 tubes. Spring holder are provided for tube clamping.

V.D.R.L. ROTATOR
Used for V.D.R.L. Test Blood grouping tests and also agglutination Test etc for mixing of solution. The Rotation platform size 300 mm x 300mm for accommodate blood bottle or flask using by spring holder. Unit having Fixed speed / variable approx: 130 RPM supplied ON/OFF switch , indicator light to work on 220 Volts A.C

• Scientifically designed to provide excellent vacuum & temp. performance.
  
• Outer MS Powder coated finish or S. Steel chamber.
• Inner heavy gauge S. Steel argon welded & mirror polished.
• High reliability & low leakage rate.
• Toughened glass door for viewing.
• 0 to 30" / 0 to 760 mm of Hg Vacuum.
• Vacuum Gauge & Cock provided.
• 3 Heat Switch / Energy Regulator for Precise control.
• Thermostat / Digital Controller / Micro Controller.
• Long lasting  molded silicon gasket.
• Temp. Range : Ambient + 500C to 13000C  / 25000C

Rotary oil Sealed pumps are quite operating and vibration less.  Manufactured on advance technology duly tested 220 VOLTS A.C to assure satisfactory performance. Motor and drives pump is completely on Rectangular Heavy steel base plate are furnished. V. Belt is covered with Steel cover for safety measures and connected with pump and motor pulley. Vacuum pump are supplied with Vacuum Oil ( without Vacuum Gauge, Moisture trap. MCLOAD gauge , and non return valve etc.) Vacuum pumps are available from 25 litre cap to 200 litre cap. with :-
(a) Vacuum Gauge with Regulator dial type
(b) Moisture trap fitted with Vacuum Gauge and Regulator
(c) Mclaod Guage with Mercury
(d) Non Return Valve with dial guage and regulator
(e) Non Return Valve

Fitted with neoprene Rubber Cup in part Vigorous Agitation. Unit is very useful for stirring Test Tube, Centrifuge Tube. Mixing action is controlled by varying the angle and pressure of the tube by hand shaking starts the vessel.(Neoprene Rubber cup) with touch on/ off system.

Serological Water Bath, temperature range from ambient temperature to 80 ^o C. thermostatic control with an accuracy +/- 0.5 ^o C. Double walled inside S.S. and outside Mild steel. Bath consists of two pilot lamps, temp. control knob andON/OFF switch. To work on 220/230 Volts AC. Supply with or without stirring arrangement without racks and thermometer.

Model Size Inside Chamber (Stainless Steel)

Optional Arrangements

A. Stirrer with 1/20 HP high speed motor with stainless stirring rod and blade.

B. Speed regulator can be fitted at an extra cost.

C. Digital electronics temp. Controller-cum-indicator at extra cost.

1) CYLINDERICAL SINGLE WALL STAINLESS STEEL.
 Outer body ,Lid and concentric Rings Stainless steel : fitted with Immersion heater with wire and plug:

SIZE (DIA) X HEIGHT
a) 200 MM x 150 MM
b) 250 MM X 200 MM 

2) RECTANGULAR SINGLE WALL STAINLESS STEEL
Complete body ,Lid and concentric Rings Stainless steel : fitted with Immersion heater with wire and plug:
WIDTHx DEPTHx HEIGHT
(a) 300MM X 250MM X 100 MM (6 HOLES OF 75MM DIA).
(b) 455MM X 355MM X 100 MM (9 HOLES OF 75MM DIA).
(c) 425MM X 325 MM X 100 MM (12 HOLES OF 75MM DIA).
                       
3) RECTANGULAR DOUBLE WALL
DOUBLE Walled, Outer body made of MILD STEEL duly painted or Stainless steel Inner body (working chamber) Lid and concentric Rings made of Stainless Steel. Fitted with immersion heater to work on 220 Volts A.C.
WIDTH xDEPTHx HEIGHT
(a) 300MM X 250MM X 100 MM (6 HOLES OF 75MM DIA).
(b) 455MM X 355MM X 100 MM (9 HOLES OF 75MM DIA).
(c) 425MM X 325 MM X 100 MM (12 HOLES OF 75MM DIA).
                       
4) SEROLOGICAL WATER BATH
Thermostatically controlled (Automatic Temperature control)
DOUBLE Walled, Outer body made of MILD STEEL duly painted or stainless steel . Inner body (working chamber) Lid Stainless Steel. Fitted with immersion heater to work on 220 Volts A.C with 3-core wire and plug. Digital Temperature Indicator cum controller in place of Thermostat and stirrer can be fitted with the bath.
WIDTH xDEPTHx HEIGHT
(a) 300MM X 250MM X 175 MM (for 2 racks)
(b) 330 MM X 250MM X 175 MM (for 4 racks)
(c) 455MM X 300 MM X 175 MM (for 6 racks)
(d) 605MM X 300 MM X 175 MM (for 8 racks)

wall mounting    table pattern automatic electrically operated. Made of Stainless Steel, Vapour Baffle, Removable Condensing Tube and Lid are Stainless Steel . This still is fitted with Immersion type Elements. The Stop cock fitted to the unit. The still is provided with Wall mounting Iron Bracket to be fixed on the wall which the still can rest to work on 220 volts A.C supply. Low water cut off device to protect the heaters to burnt. Opening condensor system for cleaning purpose.
CAPACITY
(a) 2 Litre
(b) 4 Litre
(c) 6 Litre
(d) 8 Litre
LABORATORY WATER DISTILLATION STILL
(table pattern barnstead type )
Electrically operated.(improved model), Double walled: inner and outer body and boiling condenser also made of stainless steel.
(a) This method of producing and storing distilled water is designed specially to meet the needs of the MODERN Hospital and Laboratory Research. To work on 220 Volts A.C supply with 3 core wire and plug (without rubber tubing).
(b) Available cap. From 2 litre to 20 litres