Animal in two diferent sizes, these cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.

Rigid polythene, medium wall, screw capped with stopcock. Capacity 2.5, 5, 10, 20 liters.

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable durable and dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be totally disengaged before autoclaving.
capacity 5 ltr, 10 ltr, 20 ltrs.

These sets consist of moulded balls of different colors and sizes along with lugs of different sizes. These sets are very helpful in modelling different organic & inorganic compounds.
SENIOR SET: This set consists of 150 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.
JUNIOR SET: This set consists of 30 connecting lugs & 75 balls of different colours & sizes.

Polylab Beakers, moulded in Polypropylene, have excellenct clarity and very good chemical resistance. The autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Capacity 50 ml.,100ml, 250ml, 1000ml, 2000ml.

Moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Capacity 50 ml.,100ml, 250ml, 1000ml,

Made of polypropylene, available in different sizes.

Made of porcelain, for pneumatic trough, glazed inside and out.
Dia in cms : 6, 7.5, 8.5, 10

Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has a perforated filter plate.
Diameter 70mm, 110mm.

Buchner funnels with fixed perforated plates ; all glazed ; sizes 35mm to 400mm available.

This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofloric Acid and Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.

This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, singel handedly.

Casseroles – Deep form with lip and porcelain handle ; capacities available 30ml to 1250ml. sheet.

This Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50ml. Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surfaces. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15ml. tubes respectively. These tubes are available sterilized as well as non-sterilized.
Capacity 15ml, 50ml, 15ml-sterile

Clay pipe on thick iron wire
Size in cms : 5, 6, 7.5

Porcelain, with handle, glazed inside and outside.
LxBxW : 80x12x10,
86x13x11, 90x13x11, 120x13x11

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.
Capacity 100ml, 250ml, 500 ml

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The Measures are clear have good chemical resistance and have raised graduations for easy reading.
Capacity 12ml, 25ml, 50ml. 125ml, 200ml,

Moulded in Polypropelene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edges prevent leakage & slippage.

This rack is for both 0.5ml & 1.5ml. micro centrifuge tubes. Each side has 108 holes for 0.5 & 1.5ml. MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face of the base has a unique alpha-numeric index for easy identification of the tube.
Rack for 0.5 ml. & 1.5 ml. MCTs

This jar is made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Porcelain, squat type, glazed inside and outside, complete with lid with ringed handle.
Capacity (ml) : 15 25 30 50 80 100 150 200

Porcelain, tall form, glazed inside and outside, complete with lid with ringed handle.
Capacity (ml) : 10, 20, 25, 30, 35, 50, 100

Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can accomodate Cryo Vials of up to 4.5 ml. capacity and are designed to be used at temperatures ranging from -190oC to 121oC. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
81 Places for 1 ml. or 1.8ml. Cryo Vials
81 Places for 1 ml. or 1.8ml. Cryo Vials
100 Places for 1 ml. or 1.8ml. Cryo Vials