Specification

The instrument has a cup wheel consisting of three conical cups in a horizontal plane. The cup wheel spindle is of stainless steel and connected by warm gearing to a rev. counter mounted in a waterproof housing. by observing the counter reading at the beginning and  end of  any period of interest the average wind speed during interval can be calculated . The counter observation window is sloped to permit easy reading when mounted on the mast.  

SPECIFICATION:

HORIZON MAKE  with one year Guarantee

Auto level having dual Dampen compensator and compensator checking know with standard accessories (Allen key, adjusting pin, plumbob, operation manual) supply with hard shell plastic container along with  telescopic  tripod .

Magnification:

32 X and having standard deviation 1mm per 1 km. Double run.

Specification

Water Stage Level Recorders: it is highly sensitive precision instrument which is a scientific aid to be installed at gauging sites on canal systems to regulate discharge for efficient management. It can also record of varying levels of reservoirs, wells, streams and rivers etc.

A floating object, in a protected location, is lifted or lowered continuously by varying level. This up and down movement of the float can be transmitted to a pulley through a float line running over it and having a counter weight to facilitate movement of the pulley. The circular movement of the pulley equals the vertical movement of the float and can be transmitted to a chart drum directly. A clock driven pen moving across the chart drum at a constant speed at right angles to the direction of the angular movement, continuously records the change in water level time.

(a) Weekly type

Specification

The Bed Material Sampler is made of Brass Cabinet having an affective grasping area of about 250-cm square. The bottom of the sampler body consists of spring loaded closing jaws, the mechanism of winch is controlled by springs. The sampler is lowered with open jaws but as soon as it has taken sample from the bed and is being pulled up the jaws get closed and locked along with the top cover plates, there-by preventing the sample from being washed out.

DIMENSIONS : approx. 20 x 20 x 40 cm.

NOTE : for lowering the instruments a winch system is also required.

Specification

BIO- CHEMICAL OXYGEN DENAND :- designed for LOW Temp. incubationand routine dtermination of B.O.D double walled construction. Inner chamber made of anodized alum. Sheet. Outer double wall door is provided with magnetic gestic and look & key arrangement. Inner door made mude out of clear acrylic sheet allowing inspeotion of meterial in the chamber  Temp. Door operated inner illuminztion has been provided. The gap between the walls are filled with glass wool for Temp. insulation. The cabinet is mounted on castors.

Temp. is controlled by a sensitive thermostat from 5 ˚C to 50˚ +/- 1˚C for lower temp. working a standard cooling unit with a scaledcompressor with protective devices has been provided belowthe chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher Temp. working . the Temp. can be regulated within the range by means of a high precision double action thermo. Regulotor. Inner air circulating system is provided to achieve uniform Temp. in the hole chamber.

A control panel is provided with various indicators, ON  OFF switch L shaped thermometer. Supplied with cord & plug. The equipment is workable on 220V AC 50 Hz single phase.

Bridge Outfit Made of Mild Steel (Channels) : Hand Operated

Bridge Outfit Made of Mild Steel (Channels) : for lowering and raising tee current meters, heavy fish weights and samplers after fitting it on boat or Bridge It is portable and adjustable. Two pulls are fitted with other necessary arrangements for keeping steel wire straight, necessary arrangements for fixing the nut s bolts are provided on the plates, fixed for lowering reel as well as on side plates.

Specification

Conductivity meter with digital LCD display

Specification

D . O Sampler: Dissolved Oxygen Water Sampler this slmpllfied water sampler was designed to properly collect water samples for Oxigen determination by winkler titration or test kit analasis. The sample chamber ( totel voloum 400 ml) containing a 60 ml BOD bottle is deployed in the closed position to the specified depth. A sharp pull on the towllne dislodges two rubber stopers allowing water to flush through the BOD bottle (6 X) while air escapes through an “air out “port. The sampler is retrieved, lld removed,and the water sample is ready for oxygen determination .The unit includes a clear polycar bonate and polyethylene sample chamber, 2 lb .lead ballast weight , Lamotte 60 ml bottle, 10.0 m calibrated line with 1. 0 m graduations, and nylon carrying case.

Specification

 LOW TEMP. BATH: Deep Freezer

This quick freezer is designed for quick freezing and storing of blood components serum, vaccines, biological and medical specimen s. clinical samples etc. at low temperatures. This freezer is with specially engineered superior insulation and specially designed refrigeration system. Constructed of double walls, that exterior is made of steel while the interior of stainless steel having PUF insulation to minimize heat loss.

Capillary controlled balanced hermetically sealed refrigeration is most economical, trouble free and exceptionally quiet. This quick freezer is available in vertical version with temp. Up to 0 to –20˚C. Capacity : - 6.1 Cu ft 

SPECIFICATION:

The water level indicator shall consists of a cable reel of 30 m./ 50m./100m. Long and shall comprise of two insulated wires bared at the contact and which passes through a weighed probe of any suitable material, insulated wire is soldered to contact points.

SALIENT FEATURES :

Display
Measurement : LCD Display
Range : 50m
Resolution : 1 cm
Measurement
Accuracy : +/- 0.1 m
Sensor : Water Probe with optical shaft encoder.
Battery : Built-in, 6V, 4AH
Battery Life : With display on 24 hours once fully charged.
Termination : All termination is provided at rear panel.
Bore Diameter : 15 mm or more.
Indication : Buzzer indication on actual water level.

SALIENT FEATURES

QUARTZ CRYSTAL CONTROLLED TIME BASE
DIGITAL THUMB WHEEL SWITCH SELECTION
HIGH QUALITY ACCURACY
PORTABILITY

Digital Revolutionary Counter (Preset Time / Rev.)

Revolution counter is a highly sensitive display facility which facilitate the user to indicate the water velocities in the form of digital counts used to calculate water current(velocity) this unit comprises of 3 digit L.C.D display, digital thumb wheel switch for the setting of time as well as counts. One at a time. The resolution of counter is 1 sec. for time and ,1 revolution for counts. Counter facilitate the user to select either time or count as a reference and display the other. Toget time on display please press the central switch marked time, Other wise it should not be pressed at all to get Revolutions. And additional features of such counter is Quartz Crystal controlled timer to achieve high quality of accuracy in time measurement and 3 digit digital thumb wheel switch to set counter (1-999) with step of least count of 1 digit and 1 sec. Respectively.

Note : Press Switch Marked Rev./Time toget Time; otherwise it will read Revolutions

1. Range
Counts : 0-999
Time : 0-999

2. Least Count : 1 Count
Count : 1 revolution
Time: 1 Sec.

3. Accuracy
Counts : 1% +/- Least Count Error
Time : 0.01% +/- Least Count Error

4 . Ref. Setting : Through Thumb Wheels Switch
(1 Time/Count)

5. Reference Selection : Through Thumb Wheels Switch

6. Display : 3 – L.C.D Display

7. Counting Speed : 30 Rev./ Sec.

8. Power Supply : 1.5 Volts X 4 Standard Size Battery

9. Battery Life : 150 Hrs. (Approx.)

SONODEPTH

Ultrasonic Digital Depth / Echo Sounder with alarm (option)

TECHNICAL DATA

Brief Specifications :

• Tipping bucket type funnel dia 8”.
• Micro controller : 16 F 874 PIC.
• Data Storage : 128K EEPROM
• Program Memory: 8 K.
• Real Time clock : Provided DD/MM/YY & HH/MM/SS.
• Scan Rate : Programmable either from 1 min to 24 hour.
• Measurement Accuracy : Better then ± 8% resolution 0.2mm.
• Display :16 x 2 LCD display.
• Power input :Two 12 V / 7 Amp. Internal Battery.
• Battery Charging : Through Solar Panel (10W/12VDC).
• Operating Temperature Range: 0 to 500C
• Operating Humidity Range : 0 to 95 % non condensing .
• Data Output : Direct on Lap Top computer
• Expandability: More Channel can be added.

Brief Specifications :

• Shaft encoder type
• Micro controller : 16 F 874 PIC.
• Measuring Range : ± 500 meters.
• Resolution :1mm.
• Over all : ± 2mm.
• Real Time clock :Non Volatile RTC with Programmable Alarm.
• Scan Rate: Programmable either from 1 minute to 24 hour.
• Display :16 x 2 LC D Display
• Commands Input :Through 4 x 2 Membrane Key Pad.
• Power Input : 12 V/7 Amp. Internal Battery. 2 Nos.
• Battery Charges: Through Solar Panel (10 W/12 VDC).
• Operating Temp. Range: 0 to 500C
• Operating Humidity Range : 0 to 95 % non condensing .
• Data Output : through data shuttle
• Expandability : More Channel can be added with separate interface card.
• Memory : 128 K NV Ram capable of storing 16500 data sets.
• Battery Backup – 15 days

SALIENT FEATURES

MICRO PROCESSOR BASED

QUARTZ CRYSTAL CONTROLLED TIME BASE
HIGH QUALITY ACCURACY
PORTABILITY

Digital Direct Velocity Counter

Revolution counter is a highly sensitive display facility which facilitate the user to indicate the water velocities

Note : Press Switch it will read Direct Velocity

1. Range
Counts : 0-999
Time : 0-999

2. Accuracy
Counts : 1% +/- Least Count Error
Time : 0.01% +/- Least Count Error

3. Display : 3 – L.C.D Display

4. Counting Speed : 50 Rev./ Sec.

5. Power Supply : 9 Volts X 1 small Size Battery

6. Battery Life : 150 Hrs. (Approx.)

Specification

This Micro-controller based Direct Velocity Indicator has been designed to measure the Velocity of water in a flowing stream. It uses the latest Microchip’s Micro-controller and can be used with any calibrated Water Current Meter. The velocity of water is calculated as per the calibration equation provided with the Sensor and displayed on the 16x2 LCD display. The Velocity Indicator consists of 4x1 tactile membrane keypad mounted on the front panel. You can save upto 56 readings . Two terminals to connect the current meter sensor are provided on the top. One power connector for charging adopter is also pro-vided.

Specification:

1. Processor: 16F628.
2. Technology: RISC.
3. Display: 16x2 LCD.
4. Key board: 4x1 tactile Membrane.
5. Velocity Range: 0 to 99.99 mtrs / Sec.
6. Resolution: 0.01 mtrs / Sec.
7. Averaging time: 1 to 100 Secs.
8. Power source: Two ‘AA’ 2100 mAh NiMH batteries.
9. Battery Make: Sanyo (Japan).
10. Battery life: 500 charge-discharge cycles (Capacity reduced to 70%).
11. Back up time: Upto 200 hours.
12. Charging: Through 9 V DC 500 mAh Adopter.
13. Charging Type: CC - CV.
14. Charging Time: 16 Hours (Approx.).
15. Leakage current: < 2 micro amp (Equipment switched off).

Features:

1. Microcontroller based.
2. Storage for 56 readings.
3. Stored in EEprom (Remains intact even if battery removed).
4. Retrieval of data through keyboard.
5. Programmable current meter equation with storage.
6. Programmable polarity (+ve or -ve) for constant in the equation.
7. Range of multiplier: 0.0001 to 1.0000.
8. Range of constant: 0.0000 to 0.9999.
9. Programmable averaging time (1 to 100 secs).
10. Time out features for accidental press of function key (30 Sec).
11. Auto power off if current meter not connected and no key is pressed (10 Minutes).
12. Portable, hand-held easy to use.
13. Battery status indication.

User Friendly Menu driven programmable functions

LUTRON : MADE IN TAIWAN

MODEL : 5510

MICROPROCESSOR BASED

DISPLAY : 13 mm LCD with ANNUNICIATOR

MEMORY AND RS. 232 PORT WITH ATC

Range
:
0.0 to 20.0 mg/1

0.0 to 60.0 C

Lutron – 5510 , microprocessor based D.O. Meter, best and accurate results.
Compact table model with memory and ATC RS.-232 Port to connect with PC.

The Model is available duly packed in safety box.

Option D.O. Meter INDIAN also avalable .

Introduction

Leboratory oven for all the Heating & drawing of samples

ovens are manufactured in size with interier materials .the oven are double wall construction the outer wall is mild steel painted and inner wall in aluminum there are well insulated wth glass wool. The heating is either from bottom or from three side by means of best quality electrical heaters. Standerd temp. range is 50 to 250 ˚C accuracy thermostate controled within +/- 2˚ C . a heat control enables fast heating at initial stage .

Suitable for operations on standard single phase , 240 AC, 50AC .

SPECIFICATION ( wattage )

Enamel Bucket with Lid 12 Liter CAP. Size 30 CM. BEST QUALITY

Specification: 178-mm (7”) I.F.with tilting arrangement and coincidence bubble (U Bubble). Circular one for quick setting of instruments ‘U’ type longitudinal bubble sensitivity 30 sec per 2 mm operated through micrometer / tilting screw to place the line of collimation of the instrument in the horizontal plane. Provision for observation of the magnified image of the two ends of the longitudinal bubble forming ‘U’shape through and eyepiece placed by the side of telescope, Magnification of telescope about 30 diameter, stadia constant 100 packed in fine. fiber with all accessories .

SPECIFICATION

It is Demountable Type Extensometer used for measuring strains in Structural Components. it can be used with specimens of Thickness or Diameter 3mm To 25 mm. Gauge Length is also Variable in Steps on 10 mm From 30 mm to 120 mm. it used two Dial Gauge to Measure Strains. Both the Gauge are read simultaneously and there average is taken as the Strain of the Sample Under Test. Gauge Length Bars are three pairs in number the first one is for 30 mm to 60 mm, Second one is for 30 mm To 100 mm, and third is for 30 mm to 120 mm. the lower Knife Edge Point is Spring Loaded while a clamp has been provided for the upper knife edge contacts and can be used if and when required.

1. With two Dial Gauge least count .01mm x 5 mm Range (Mitutotyo Make)
2. With two Dial Gauge least count .002mm x  2 mm Range (Backer Make)

Note:
Other sizes and gauge length are available on request.

UNICARE LIFE BUOY MARINE LIFE SAVING EQUIPMENT

The life buoy is manufacturerd in durable high visibility orange synthetic material and requires non maintenance .

Moisture proof and non- inflammable.

The H-Glow reflective material fixed in the indentation identifies victims in distress.

The unicare life Buoy complies with the latest regulation.

Dimensions : 72 X 43 cms

Thickness : 11 cms

Weight : not less than 2.5 kg .,resp. 4.0 kg.

Specification :

Life jacket made of parachute material with imported zip three heavy-duty nylon belts with an additional nylon rope Fastner along with Retro Reflective tape whistle as per MMD/MOT Regulation and Recommendation.

Specification: These Screens are manufactured as per IS : 5948 : 1970 and the suitable for housing thermograph. Hydrographic dry and wet bulb. Thermometer and Maximum Minimum Thermometer. Basically these are manufactured from best quality Indian wood and accurately assembled with side louvers and supplied i.e steers Stream & Metautyiae.